Flyers and posters
The piece you are making

A flyer or a poster that works where it is actually pinned up

A flyer at a standard size, legible from where it will be read, that survives a crowded board, a home printer and the weather it will sit in.

Start here Essentials

Five steps. The first four are at a desk and the fifth is not, and the fifth is the one that finds the problem.

  1. Choose the finished size. The printer you have decides most of this (sizes).
  2. Set the top line at a size that reads from the distance you paced. Letter height from distance gives the figure (top, middle, bottom).
  3. Put the facts in the middle at a size that reads at arm's length. (top, middle, bottom).
  4. Leave the bottom third for the action and how to reach you. (top, middle, bottom).
  5. Print one, pin it up where it will live, and walk away from it. (printing one and pinning it up).

Minimum time: about an hour, including the trip. Done when: you have pinned one up in the real place and read the top line from where people will actually be standing.

1. The board is the design problem Understand

A flyer is rarely looked at. It is glanced past, on a board with thirty or forty other flyers, in a corridor somebody is walking down on their way somewhere else.

That has three consequences that shape everything in this chapter.

  • Only part of your flyer is visible. On a full board, later flyers go over earlier ones, usually from the bottom. The top inch or two is what survives, and it has to carry the whole first question.
  • You have a couple of seconds. Not to be read; to be sorted into "for me" or "not for me". The Nielsen Norman Group's scanning work is about pages people are at least looking at; a board is harsher than that.
  • Everything around you is also trying. Big type, color, pictures. Competing on intensity is a race you will not win, and winning it would not help: what gets somebody to the lot on Saturday is that they can tell at a glance that it is a market and then find the hours.
Limits

A reader will over-read "poster" into "artwork". Most flyers go on a board with forty other flyers. What wins there is a short top line that reads from six feet, a clean lower third, and the date where a passing eye lands, rather than a striking image. That is not an argument against a good picture; it is an argument about what the picture has to beat. A picture earns its place when the piece is seen alone and at leisure, when the picture is the information, as a map or a diagram often is, or when it identifies the thing faster than words do, as a photograph of the actual building can. On a crowded board, a picture that is merely attractive is competing with thirty others that are also attractive.

So the design question for a flyer is not "how do I stand out". It is "what can somebody tell from the top two inches, from six feet, in two seconds", and then "once they have stopped, can they find the three things they need".

2. Sizes, and what each one costs to print

SizeWhat it isPrinted byNotes
8.5 by 11 inUS LetterAny home printer, any copy shopThe default. Fits on any board, fits in a window, fits in a bag.
11 by 17 inTabloid or Ledger, called ANSI BA copy shop; some office printersTwice the area for roughly twice the attention. Will not fit some boards.
18 by 24 inMedium posterA print serviceYou have usually arrived here because of reading distance.
24 by 36 inLarge posterA print serviceNeeds a wall, not a board.
A4, 210 by 297 mmThe international letter sizeAny printerSlightly narrower and taller than US Letter.

Convention Those are the conventional figures, taken from a third-party reference site rather than from the underlying standards documents, which this manual did not read. The underlying standards are ANSI/ASME Y14.1 in the United States and ISO 216 for the A series. The full table with its sources is on The numbers, and where each comes from.

Two practical notes that decide more than the table does:

  • A bigger sheet is not a bigger headline unless you make it one. People size up to 11 by 17 and then keep the same type sizes, so they get the same flyer with more white space. If you go up a size, the reason should be that the top line needs to be physically larger, which is a number from Letter height from distance.
  • Quantity decides the printer, and the printer decides the format. Sixty copies with color to the edge is a copy shop or a print service. Three copies in black and white is a home printer and a few minutes.

3. Top, middle, bottom

A flyer divides naturally into three bands, and giving each one a job settles most layout arguments before they happen.

BandJobRead fromTypical content
Top thirdSay what this isThe paced distanceThe name of the thing. Two or three words. Level one from What gets read first.
Middle thirdAnswer when and whereArm's length, after they stopDay, hours, place. Level two.
Bottom thirdSay what to do and how to reach youArm's lengthCost, contact, the web address, any required credit. Level three.

Why the bottom third is left clean, specifically: it is where the hand goes, where a tear-off strip lives if there is one, where a reader looks for the contact after deciding, and where overlapping flyers do the most damage. Filling it with decoration costs you the one band with a clear job.

The top line's size is not a rule of thumb; it is the published rate in Letter height from distance. For a window flyer read from six feet, the figure is 5/8 inch of capital height. For a board read from ten feet, it is 1 1/8 inch. Setting the top line at the size that fits rather than at the size that reads is the commonest failure in this chapter, and it is invisible until the walk-back.

Here is the market flyer again, laid out in bands, with the sizes marked:

+--------------------------------------------------+ | ARBOR STREET MARKET |Top third. 5/8 in cap height, which reads from six feet. Three words. | | +--------------------------------------------------+ | Second Saturdays |Middle third. Arm's length. The two facts that decide whether somebody comes. | 8 AM to 1 PM | | Arbor Street municipal lot | | | +--------------------------------------------------+ | Free to attend |Bottom third. Kept clean. Contact last, in readable text. | Fourteen local growers and makers | | arborstreetmarket.org | +--------------------------------------------------+

4. Getting the file right for whoever prints it

Four things, in the order they cause trouble.

  1. Build the document at the finished size. Not oversized with a plan to shrink it. Both printers this manual read say the same thing.
  2. Add bleed only if color runs off the edge, and only if the printer trims the sheet. Page setup and resolution works out the document size from the finished size.
  3. Keep everything readable inside the safe area. 0.125 inch in from the trim for small format, 0.25 inch where there is a border round the edge. Those figures are published by Smartpress and independently by 4OVER4.COM. Product-specific
  4. Export a PDF and open it again on a different machine or in a different application. This is the step that finds a missing font, which both printers name as the error that changes your layout. Embed the fonts, or convert the type to outlines.

On color: Smartpress asks for CMYK, and 4OVER4.COM asks for CMYK for offset and digital work. Product-specific That is two printers agreeing, and it still means ask yours, because a copy shop printing from a PDF on a digital press may want something else entirely. Expect the color to shift from what your screen showed; a bright screen blue is the usual casualty.

On pictures: 300 DPI at the finished size for small format, 150 PPI for a large poster. Pictures you can use has the arithmetic and the licenses.

5. Printing one and pinning it up

This is step five of Start here and it is not optional. Everything up to here is a prediction made at a desk.

What to do, in order:

  1. Print one on the machine and paper you will actually use. A different printer is a different flyer.
  2. Take it to the place and put it where it will live, with the tape or pins you will use.
  3. Walk away to the paced distance and turn round.
  4. Ask the first question out loud: what is this? If you have to look for the answer, the top line is too small or too long.
  5. Walk in to arm's length and ask the second: when and where? If you have to hunt, the middle band is set too close to the bottom one.
  6. Look at what is around it. If it disappears into the board, the problem is usually that your top line is a sentence and everybody else's is two words.
  7. Write what you could and could not read in the Distance test log on Before it goes out.

Test it Do this before you print sixty. The whole argument for the test is that one sheet of paper costs nothing and sixty wrong ones cost an afternoon and the money.

Tear-off strips Go deeper

A tear-off strip is a column at the foot of a flyer, cut most of the way up, carrying a phone number or an address that somebody can take away.

What makes them work:

  • Cut them so they tear. Cut from the bottom edge upward, stopping about an inch and a half below the main text, so each strip has a solid top holding it on. A cut that goes too far leaves strips that fall off; one that does not go far enough leaves strips nobody can get loose.
  • Put the identifying word on every strip, not just the number. A pocket full of numbers with no context is a pocket full of litter. "Arbor Market 555-0148" on each one.
  • Make them wide enough to grip. Somewhere around three quarters of an inch to an inch.
  • Leave the strips out of the layout's lower third job. If strips are going on, the contact in the bottom band can be smaller, because the strip is carrying it.

And the honest note: tear-offs are mostly a thing people photograph now rather than tear. Which means the number has to be legible in a photograph taken at an angle in bad light, which is an argument for setting it larger than you would think and for not putting it over a picture.

Bleed, and the two ways round it at home Go deeper

Bleed is artwork extended past the line the paper will be cut on, so that a small shift in the cut does not leave a white sliver at the edge. You need it only if color runs to the edge of the finished piece, and only if somebody trims the sheet.

The figures: 0.125 inch on every side for small format, published by Smartpress and by 4OVER4.COM; 0.25 inch for large format, published by Smartpress alone. 4OVER4.COM's worked examples are useful for seeing what it means in practice: a 3.5 by 2 inch business card is built as a 3.75 by 2.25 inch document; a 4 by 6 inch postcard is built at 4.25 by 6.25.

A home printer cannot bleed, because it cannot print to the edge of a sheet. Every machine has an unprintable band, and it differs by model. There are two ways round it:

  1. Design the edges white. Put a margin round the piece and let the paper be the border. This is the right answer almost every time, it costs nothing, and nobody looking at the flyer knows it was a workaround.
  2. Print on a larger sheet and cut it down. Print an 8 by 10 inch design on letter paper with crop marks, and trim it with a straight edge and a knife. It works, it is slow, and it is worth it for a small number of pieces where the edge color matters.

One thing that catches people with any printer: setting a bleed in the document does nothing unless the export is told to include it. 4OVER4.COM makes the point directly, and the fix is to turn on the bleed option when you export the PDF, or type the figure in manually.

Full-bleed color at a copy shop usually costs more per sheet than the same piece with white margins, because of the larger sheet and the trimming. If sixty copies are involved, ask for both prices before you commit to the design.

Weather, and where you are allowed to put it Go deeper

Caution

Get the owner's permission before you put anything on a window, a wall, a fence, a board or a lawn, and take it down when you said you would. Work from the ground; nothing on a flyer is worth a ladder. Do not attach anything to a utility pole, a traffic sign, a street light or a tree you do not own.

Paper outdoors. Ordinary paper outdoors curls within hours in humidity, runs in the first rain, and fades in direct sun over a few days. The realistic plan is replacement rather than survival: print spares, check them, and swap them. Things that help a little are a plastic sleeve taped shut at the top only so water drains, a laminating pouch if you have access to one, and a sheltered location. Things that do not help are heavier paper and hoping.

A laminated sign has a problem of its own: gloss lamination adds a reflection, and a reader standing in the wrong place sees the sky instead of the text. The ADA Standards require a non-glare finish for visual characters on signs in their scope, which is the same problem written down by a standards body. Matte laminate avoids most of it.

Where you are allowed to put it. This manual names no rule for any place, because the rules vary by town and sometimes by street. What is worth knowing is the shape of the questions:

  • A shop window, a community board, an office corridor. Somebody owns it. Ask them, agree how long, and take it down on the day you said.
  • A lawn, a verge, a corner. Many towns limit temporary signs by size, number, placement and duration, and some require a permit. Ask the authority Ask your municipal clerk or code office.
  • A pole, a traffic sign, a street light, a tree. Usually prohibited, often for safety reasons, and the staples outlive the flyer by years.

The sign-specific version of all of this, including placement near a road, is in Signs.

QR codes on a public flyer Go deeper

Three practical points, the last of which is the one with an agency behind it.

Size it for the distance. A code has to be scannable from where somebody stands, and phone cameras need a usable number of pixels on the pattern. On a window flyer read from six feet, an inch is a reasonable minimum and larger is better; test it with an actual phone at the actual distance rather than guessing.

Put a short readable address beside it. Not only because a reader may not want to scan, but because the code can fail: bad light, a glare on the glass, an older phone, a cracked screen.

And because a printed code can be covered. The Federal Trade Commission's consumer alert describes scammers covering QR codes on parking meters with their own, and advises people to inspect the URL before opening it and not to scan unexpected codes. The FBI's Internet Crime Complaint Center issued a public service announcement in July 2025 about QR codes in unsolicited packages used to start fraud, with the same instruction: do not scan QR codes from unknown origins. Regulation

Neither of those is about your flyer, and neither is a reason to leave the code off. What they are about is the reader's position: somebody looking at a square on a board has no way to check what it points at. A readable address gives them a route that does not depend on the square being the one you printed, and it costs one line.

6. See it: the market flyer, and three yard signs See it

Fictional example

Dolores Reyes prints sixty market flyers. 8.5 by 11 inches, for shop windows, read from the sidewalk at about six feet, which she paced. Flyers at a copy shop; she works in Canva on the free plan.

Known. Second Saturdays, 8 AM to 1 PM, free, fourteen vendors, the Arbor Street municipal lot. Sixty copies.

Assumed. That the shopkeepers put them in the window rather than on a counter. Dolores's assumption, and the one the whole size calculation rests on: a counter is read at two feet, not six. She settles it by asking one shopkeeper before printing sixty.

Open. Whether the copy shop trims the sheet, which decides whether bleed matters. Settled by: the shop, when she drops the file off.

What the numbers gave her. At six feet, Letter height from distance gives 5/8 inch of capital height for the top line. She set one capital A at 5/8 inch measured with a ruler on a printout, found that her typeface needed about 60 point to get there, and set the top line from the measurement rather than from the point size.

What she decided about color. The design has a colored band across the top. At the copy shop, full-bleed color costs more per sheet than the same flyer with white margins. Under these assumptions, sixty copies with a bled band is the more expensive option and she chose white margins, which also removed the bleed question entirely. The fact that would change that decision is the price difference, which she asked for and which the shop gave her as a per-sheet figure.

What the pin-up found. In the window, the afternoon sun put a reflection across the middle band. The fix was placement, half a foot lower, which the shopkeeper did not mind. No amount of design would have found that at a desk.

Fictional example

Wendell Halvorsen prints three driveway sale signs. 12 by 18 inch posterboard, made in Microsoft Word, printed at home on 8.5 by 11 inch paper and taped to board.

Known. Saturday, 8:00 AM to 2:00 PM, 1409 Vance Street. One sign zip-tied to his own fence; two on posts at the corners of Vance and Pell, read from a car at about twenty-five miles an hour with roughly sixty feet of warning.

Assumed. That drivers are looking for the sign. They are not.

Open. Whether a sign may stand at that corner, and for how long. Settled by: his municipal clerk.

The arithmetic that decided the design. Sixty feet at the published rate is 5/8 plus 1/8 for each foot over six, which is 7.3 inches of capital height. His posterboard is 12 by 18 inches. One word at 7.3 inches tall is most of the board, which is the finding: the corner signs carry SALE and an arrow and nothing else, because nothing else fits at a size anybody can read. The date, the hours and the address go on the fence sign at the house, which is read standing still.

Printing at home on letter paper and taping the sheets to board means each letter is built from pieces, so he printed the word across three sheets in landscape and lined them up on the board with a ruler. Crude, and it reads from sixty feet, which is the only criterion the sign has.

7. Practice: print one, pin it, walk away Practice

Minimum: one printed copy, pinned where it will live, read from the paced distance. That is the result Start here asks for. Time: about an hour including the trip. Materials: a printer, paper, tape or pins, a ruler, and the place.

  1. Get the cap height for your distance from Letter height from distance and write it down in inches.
  2. Set one capital letter and print it. Measure it with a ruler. Adjust the point size until the measurement matches, and write down the point size that produced it.
  3. Build the three bands with the top line at that size, the middle at a size readable at arm's length, and the bottom clean.
  4. Run the file checks: built at finished size, everything readable inside the safe area, pictures at 300 DPI, PDF exported and reopened somewhere else.
  5. Print one and go to the place. Put it up with the tape or pins you will use.
  6. Walk to the paced distance, turn round, and ask the two questions out loud.
  7. Write the result in the Distance test log on Before it goes out, change one thing, and go back.
Go deeper

The board photograph. Photograph the board with your flyer on it, then look at the photograph. The camera is less forgiving than you are, and a flyer that disappears in the photograph disappears in life.

The half-cover test. Cover the bottom two thirds of your flyer with a sheet of paper, which is what the next flyer will do. Does the visible part still say what this is?

The copy-shop quote. Before you commit to a design with color to the edge, ask the shop for two prices: full bleed, and the same piece with white margins. The difference is sometimes small and sometimes decides the design.

8. Your piece Your piece

9. Check your work Check your work

Criteria

  • At the paced distance, can you read the top line without leaning in?
  • With the bottom two thirds covered, does the visible part still say what this is?
  • Is the bottom third clean and carrying the action and the contact?
  • Is the file built at the finished size, with everything readable inside the safe area?
  • Has one been pinned up in the real place, with the real tape, and looked at?

Worked example

Wendell's corner signs pass the first criterion and fail nothing, because they carry one word and an arrow; the arithmetic forced a design that passes by construction. Dolores's flyer passed the first criterion at the desk and failed in the window because of a reflection, which is the case the pin-up exists for. Her half-cover test passes, because the top third carries the market's name alone. Her file is built at 8.5 by 11 with white margins, so the safe area is nowhere near anything.

Common mistakes

  • Setting the top line at the size that fits rather than the size that reads. Get the figure first, then see what fits inside it.
  • Going up a paper size without changing any type sizes. You have bought white space, not reach.
  • A top line that is a sentence. Two or three words, or it loses to the flyer beside it.
  • Filling the bottom third with decoration. It is the band with the clearest job.
  • Designing color to the edge on a home printer. It cannot do it; design the edges white instead.
  • Setting a bleed and exporting without it. The export has to be told.
  • Printing sixty before pinning up one.
  • Putting it up without asking the owner.

What is still unresolved

This chapter does not tell you whether you may put a sign on a particular corner, how long it may stay, or whether a permit is needed. Those vary by town, this manual names no rule for any place, and the municipal clerk or code office is the answer. It does not give your printer's figures, only two printers' published ones; Page setup and resolution does the arithmetic and your printer gives the inputs. And nothing here measures whether a better flyer brings more people. No source this manual read measures that, and the promise is legibility at a stated distance and facts that are right.

10. Knowledge check and scenario

Why is the top inch or two of a flyer the part that has to carry the first question?
Because on a full board, later flyers are pinned over earlier ones, usually from the bottom, so the top strip is often all that remains visible. The half-cover test checks it: cover the bottom two thirds and see whether what is left still says what the thing is.
You move your flyer from 8.5 by 11 to 11 by 17 and change nothing else. What have you gained?
White space. Reach comes from the physical size of the top line, not from the size of the sheet, and the figure for that comes from the distance you paced. If the reason for going larger is that the top line needs to be bigger, make it bigger; if it is not, the larger sheet costs more and does the same job.
Your flyer has a colored band running to the edge and you are printing it at home. What do you do?
Redesign the edges white. A home printer cannot print to the edge of a sheet, so a design that runs color off the edge comes out with an uneven white band round it. The alternative, printing on a larger sheet and trimming, works for a handful of copies and is slow. Nobody looking at a flyer with white margins knows it was a constraint.
(Go deeper) Why print a readable address beside a QR code on a public flyer?
Because a reader has no way to check what a printed square points at, and the FTC's consumer alert describes scammers covering codes on parking meters with their own. It also covers the ordinary failures: glare, bad light, an older phone. One line of readable text gives the reader a route that does not depend on the code.
You have forty minutes and a flyer that has to go up on a corridor board today. You have not printed one yet. The board is read from about ten feet as people walk past.
This spends the whole budget on a prediction. At ten feet the published rate gives about 1 1/8 inch of capital height for the top line, and a layout that looks balanced on a screen is usually well under that. Finding out after the copies are printed means reprinting them.
The trip is the expensive part and it is the part that pays. Ten minutes to print and walk over, two minutes looking, and you come back knowing which of the three bands is wrong instead of guessing. It also shows you what the flyer is competing with, which no mock-up does.
Better than nothing, and it will catch a top line that is far too small. It misses the light, the glare, the competition on the board and the height the flyer will be pinned at, which are usually what the real test finds.

Checklist

Records your learning only; it is not a qualification.