Reference
Setting the document up, and whether a picture will print
Two calculators. One turns a finished size into the document size, the bleed, the safe area and the margin. One tells you whether the picture you have has enough pixels for the size you want to place it at.
Assumptions behind the numbers
- The small-format figures are 0.125 in of bleed on every side and a 0.125 in safe area, rising to 0.25 in where the design has a border. Smartpress and 4OVER4.COM both publish these, independently; two printers agreeing is why this manual states them as a starting point.
- The large-format figure is 0.25 in of bleed, for signs, posters and trade show graphics. Only Smartpress publishes it among the printers we could read, so it is one printer's number.
- The resolution targets are 300 DPI for small formats and 150 PPI for large formats. Smartpress publishes both; 4OVER4.COM publishes the 300 figure as effective resolution at final size and no large-format figure.
- These are printers' specifications, not a standard. Ask your own printer before you build the file, and ask a copy shop or a library printer what it can actually do.
- The resolution arithmetic is pixels divided by inches at the placed size. Enlarging a picture in a layout lowers its effective resolution in exactly that proportion; cropping throws pixels away for good.
- A home printer cannot bleed, because it cannot print to the edge of a sheet. The page says what to do instead rather than giving a figure for it.
- Color mode is discussed on the page and not calculated. Smartpress asks for CMYK and 4OVER4.COM asks for CMYK for offset and digital work; the shift between screen and press is real and neither figure predicts it.