An invitation people can read, at a size the post office will take
Everything a guest needs in order to say yes and turn up, on a card at a size and shape that mails at the price you were expecting.
- Start here: the essentials
- Two kinds of statement, and only one has an authority
- The facts a guest needs in order to say yes
- The dimensions, and which price category they put you in
- The aspect ratio, which is where square cards die
- Setting the card
- Mailing one to yourself
- Envelopes, squares and the nonmachinable list
- When the message shares the address side
- RSVP by a date, or regrets only
- Card stock, thickness and the conflicting maximum
- See it: seventy cards, and one that would not have mailed
- Practice: measure, check, mail one
- Your piece
- Check your work
- Knowledge check and scenario
Start here Essentials
Five steps. Steps two and three cost money if you get them wrong, and step five is the only proof you have that steps two and three were right.
- Write the facts a guest needs in order to say yes. Not everything true about the event (the facts).
- Pick a card size inside the postcard or the letter limits. (the dimensions).
- Divide the length by the height and check the answer is between 1.3 and 2.5. (the aspect ratio).
- Set the type so that the date and the RSVP are the second thing read. (setting the card).
- Address one to yourself and mail it. (mailing one to yourself).
Minimum time: about an hour, plus the days the test card takes to arrive. Done when: the one you mailed to yourself has arrived, at the price you expected.
1. Two kinds of statement, and only one has an authority Understand
Everything people say about invitations falls into two groups, and this chapter is careful about which is which because the two get mixed together constantly.
| Statement | Kind | Who says so |
|---|---|---|
| A card over 4-1/4 by 6 inches is charged as a letter | A rule with a published source | USPS, Sizes for Postcards |
| Length divided by height has to be 1.3 to 2.5 | A rule with a published source | USPS, DMM 201.3.7 |
| A card over 4-1/4 in high or 6 in long has to be at least 0.009 in thick | A rule with a published source | USPS, DMM 201.1.2.1 |
| A guest needs the end time to arrange a sitter | A fact about people, stated by this manual | Nobody; it is an argument, and a good one |
| Invitations should be centered | A convention | Nobody with authority. Butterick names centering as suitable for short pieces and says so is his opinion. |
| "The honour of your presence is requested" rather than "please come" | A convention | Nobody this manual could cite |
| Guest names go on the inner envelope | A convention | Nobody this manual could cite |
A reader will over-read a wording convention into a rule. There is no authority on how an invitation should be worded, and this manual cites none. Etiquette books disagree with each other, families disagree with etiquette books, and the form that fits a retirement supper in a hall is not the form that fits anything else. What is not negotiable is two things: the facts a guest needs, and the postal dimensions. Everything in this chapter is labeled as one or the other.
The practical consequence: if somebody tells you an invitation has to say something a particular way, they may well be right about what is expected in your circle, and they are not quoting a standard. If somebody tells you a card has to be a certain size to mail at a certain price, that is checkable and this chapter checks it.
2. The facts a guest needs in order to say yes
An invitation has a harder job than a flyer, because it asks for a commitment. A guest reading it is making three decisions at once: can I come, do I want to, and what do I have to do now.
The lines that make those decisions possible:
- Who it is for and whose event it is.
- The date, with the day of the week beside it. The redundancy catches a typo, and a guest checking a calendar reads the day first.
- The start time and the end time. The end time is the single most-omitted line on an invitation, and it is what somebody arranging a sitter or a ride needs.
- The place, with the street address. A hall name is not an address.
- Parking, or that there is none.
- The cost, and how it is paid. "Eighteen dollars a person, cash or check at the door" is four words longer than "eighteen dollars" and removes a whole category of awkwardness.
- What to bring, or that nothing is needed.
- Whether children are welcome.
- Who to reply to, how, and by when. A name, one method, one date.
- Anything about the room somebody needs to know in order to decide: stairs, a long walk from parking, an outdoor element.
That is a longer list than a conventional invitation carries, and most of those lines are four or five words. Where they come from is The words come first, and the Facts to check sheet in The piece plan opens with ten rows for exactly this.
Test it The test for whether the card is finished: hand it to somebody who is not going and ask them what they would do next and what time they would arrive. The gaps come out in their answer.
3. The dimensions, and which price category they put you in
USPS sorts a flat piece of mail into categories by its physical dimensions, and the category decides the price. This manual states no prices, because no USPS page it read carried one. What it can tell you is which category a card falls in, and the figures behind that.
| Card prices | Letter-size | |
|---|---|---|
| Minimum height | 3-1/2 in | 3-1/2 in |
| Minimum length | 5 in | 5 in |
| Minimum thickness | 0.007 in | 0.007 in |
| Maximum height | 4-1/4 in | 6-1/8 in |
| Maximum length | 6 in | 11-1/2 in |
| Maximum thickness | 0.016 in | 1/4 in |
| Thicker minimum | 0.009 in once the piece is over 4-1/4 in high or 6 in long | |
| Aspect ratio | Length divided by height, 1.3 to 2.5 inclusive | |
| Source | DMM 201.1.2.1 and the USPS Sizes for Postcards page | DMM 201.1.1.1 and 201.3.7 |
Regulation Those figures are from the USPS Domestic Mail Manual and the Postal Explorer pages, read on the day this manual was built. USPS states plainly that if a piece misses the postcard dimensions, the Postal Service considers it a letter and letter-size postage is charged.
Three common sizes against those figures:
- 4 by 6 inches. Inside the card dimensions. Ratio 1.5, comfortably inside the range. The safe default.
- 5 by 7 inches. Over the card maximum of 4-1/4 by 6, so it mails at letter prices, and because it is over 4-1/4 inches high it needs to be at least 0.009 inch thick. Ratio 1.4, inside the range. A perfectly good choice; it is simply a letter, not a card.
- 5 by 5 inches. Ratio 1.0, outside the 1.3-to-2.5 range, so it is nonmachinable whatever else is true about it. The next section is about why.
Will this card mail? checks all of it from a height, a length and a thickness, and names the section behind each verdict.
4. The aspect ratio, which is where square cards die
The rule: length divided by height has to land between 1.3 and 2.5 inclusive. Length is the side parallel to the address, and height is the other one.
Getting those two the wrong way round is the commonest reason somebody's arithmetic disagrees with the counter's. On a card addressed along its long side, length is the long side. On a card addressed along its short side, which is unusual but legal, length is the short side, and the ratio comes out under 1 and fails.
Why the rule exists is worth knowing, because it explains what else it predicts: automation equipment handles rectangles within a range of proportions, and a piece outside the range has to be handled another way. USPS's own worked example of a problem piece is a square greeting card, which it says often jams postal equipment. A piece outside the range pays nonmachinable letter prices. Regulation
The DMM notes one exception that is a nice sanity check on the arithmetic: an 11 by 8.5 inch sheet cut into four 5.5 by 4.25 inch cards gives a ratio of 1.294, just under 1.3, and the manual allows it.
Test it Do the division before you order anything, with a calculator, using the measurements of the card you are actually buying rather than the name of the size. "A5" and "5 by 7" are names; 1.41 and 1.4 are ratios.
5. Setting the card
An invitation is read in the hand, so the published type ranges in Type you can read apply directly: at least 10 to 12 points in print, line spacing set as a number, one typeface family.
Three things are particular to a card.
The hierarchy is unusual. On most pieces the name of the thing is level one. On an invitation the name is usually a person, and the thing a guest needs second is the date and the reply. So the three levels are often: the honoree or the occasion; then the date and the RSVP together; then the address, cost and details.
Putting the date and the RSVP at the same level is the move that makes a card work, and it is unusual enough that people resist it. The reason is that they are one decision: can I come, and what do I have to do by when. Separating them, with the date large at the top and the RSVP small at the bottom, is how a host ends up chasing replies.
Centering is the default here, and this is one of the few places it is. A card is short, there is nothing else on it to align with, and the convention is long-standing. Butterick, who calls centered text overused in general, lists short phrases, titles and similar pieces as where it belongs, and says the position is his opinion. Preference If you center, center everything; a card with three centered lines and two left-aligned ones looks like a mistake rather than a choice.
The margin is tighter than you want. A 4 by 6 inch card with a half-inch margin all round leaves 3 by 5 inches for everything, which at 11 point is not many lines. The honest responses, in order: cut explanation rather than facts; go to 5 by 7 and accept letter prices; or print on both sides, remembering that the address side has rules of its own.
6. Mailing one to yourself
Print one, address it to yourself, put a stamp on it at a counter, and mail it.
What that test settles that nothing else does:
- The price. You find out at the counter what the piece actually costs, from a person looking at the piece, before you commit to seventy.
- Whether it survives the machinery. Thin stock creases, a glossy coating scuffs, an unusual shape gets hand-stamped.
- Whether the address area works. A barcode gets sprayed on in a particular zone, and if your design is in that zone it ends up under it.
- How long it takes. Which tells you when the real ones have to go out, counted back from the RSVP date rather than the event.
Test it Leave time for it. The card has to be printed, mailed and received before the real print run, which on a seventy-card job means starting at least a week earlier than feels necessary.
Write the result in the Facts to check sheet in The piece plan: the price you were charged, the date you mailed it and the date it arrived. That is three lines and it answers the question next year.
Envelopes, squares and the nonmachinable list Go deeper
In an envelope, the envelope is the mailpiece. Its dimensions are what count, not the card inside, so a 5 by 7 inch card in a 5.25 by 7.25 inch envelope is measured as 7.25 by 5.25, ratio 1.38, inside the range.
The square card problem. A square envelope has a ratio of 1.0 and is outside the range by construction, which is why square invitations carry a surcharge. USPS names a square greeting card as its example of a piece that often jams equipment. If you want a square card, put it in a rectangular envelope.
What makes a piece nonmachinable, from DMM 201.2.1.1: an exterior surface not made of paper; failing the 0.009 inch thickness rule for a large piece; failing the automation standards in section 3.0, which include the aspect ratio; or weighing more than 3.5 ounces. Paper window envelopes do not make a piece nonmachinable. Regulation
Three more from the automation standards, all of which are things people put in invitations:
- Clasps, strings, buttons or similar closure devices are barred on automation pieces (section 3.8). The string-and-button envelope is the classic.
- Rigid items inside, and the manual's examples are pens, pencils, keys and bottle caps (3.10). A charm, a key, a flat magnet: ask first.
- The piece has to bend around an 11-inch drum under 40 pounds of belt tension (3.12.1). Heavy board does not.
Also worth knowing: enveloped or four-side-sealed letters need a minimum 50-pound book-grade basis weight or equivalent (201.3.2), and tabs in the barcode clear zone need a paper face meeting reflectance standards, with vinyl tabs and cellophane tape not acceptable there (201.3.11).
None of that is an argument against a nice envelope. It is an argument for asking at the counter with the actual piece in hand before you buy seventy of them.
When the message shares the address side Go deeper
On a postcard with a message on the same side as the address, the address needs its own reserved area. DMM 201.1.2.7 gives two layouts:
- A vertical split: the address portion has to be at least 2-1/8 inches wide.
- A horizontal split: the address portion has to be at least 1-1/2 inches high.
Regulation Those are minimums for the address portion, and the practical design consequence is that on a 4 by 6 inch card you are designing the message into about 3-7/8 by 4 inches once the address area is reserved, which is less than people expect.
Two further points from the same part of the manual. Stock color is permissive: 201.1.2.4 says a card may be of any color or surface that permits the legible printing of the address, which is less of a constraint than people assume and still means a dark card with a handwritten address is a bad idea. And the barcode clear zone is the area at the lower right that gets sprayed during processing; anything you print there will have a barcode over it.
The simplest way to avoid all of it is to put the message on one side and nothing but the address, the stamp and white space on the other.
RSVP by a date, or regrets only Go deeper
Two formats, and the choice changes what you know and when.
RSVP by a date asks everybody to reply either way. You get a real count, and you get it only from the people who reply, which is rarely everybody. The count you have on the date is a floor, not a number.
Regrets only asks people to reply if they cannot come. You hear from fewer people, which is easier on everybody, and your count is an assumption: invited minus regrets. It is the worse choice whenever somebody is being catered for or seated, and the better one for a drop-in event where a rough number is enough.
Preference Neither is a rule; this is a judgment about what the number is for.
Whichever you pick, three things make the reply more likely:
- One method. A phone number, or an email, or a form. Offering three ways to reply means three places to check and three lists to reconcile.
- A name, not a role. People reply to a person.
- A date that gives you time to act on the answer. Count back from when the caterer, the hall or the seating plan needs the number, not from the event. Then count back again for the mail.
And the arithmetic that people skip: the card has to arrive, sit on somebody's counter, and be replied to, all before your RSVP date. The test card from mailing one to yourself tells you how long the first leg takes.
Card stock, thickness and the conflicting maximum Go deeper
Thickness is a postal requirement, not a quality preference. The minimum is 0.007 inch; a piece over 4-1/4 inches high or 6 inches long has to be at least 0.009 inch. Ordinary office paper is well under both, which is why a card printed on copier paper is not a mailable card.
Test it Measuring thickness without calipers: stack ten cards, measure the stack with a ruler, divide by ten. Ten sheets of 0.009 inch stock is 0.09 inch, which is readable on a ruler.
And the conflict this manual found and is printing rather than resolving. DMM 201.1.2.1 contains a line giving a card maximum of not more than 6 inches high, 9 inches long or 0.016 inch thick. The USPS Sizes for Postcards page gives the maximum as no more than 4-1/4 inches high by 6 inches long by 0.016 inches thick. Those two do not agree.
This manual uses 4-1/4 by 6 inches, for two reasons: it is the figure on the page USPS publishes for the public, and it is the smaller pair, so a card inside it is inside both readings. Will this card mail? prints the conflict on the page rather than quietly picking.
What to do if your card falls between the two: take it to a counter and ask, with the piece in your hand, before you print seventy. Ask the authority
On bleed. If the card is printed by a service that trims the sheet and your color runs to the edge, the document is built at the finished size plus 0.125 inch of bleed on every side. 4OVER4.COM's own example is a 4 by 6 inch postcard built at 4.25 by 6.25. Page setup and resolution does it from your finished size.
7. See it: seventy cards, and one that would not have mailed See it
Marguerite Okonkwo mails seventy invitations. Teodoro Fitz's retirement supper, Saturday, March 14, 6:00 PM, Lindell Hall, 212 Lindell Avenue. Eighteen dollars a person, paid at the door. RSVP to Marguerite by March 1. She works in Microsoft Word.
Known. Seventy cards in envelopes. She wants 5 by 7 inch cards. The hall needs the catering number ten days before the supper.
Assumed. That a 5 by 7 inch card in an envelope mails like any other letter. Marguerite's assumption, and this one holds: the envelope is the mailpiece, a 5.25 by 7.25 inch envelope has a ratio of 1.38, and that is inside the range.
Open. What a 5 by 7 inch card in an envelope costs to mail. Settled by: a counter, with the test card in her hand.
The size question. A 5 by 7 inch card is over the 4-1/4 by 6 inch card maximum, so it mails at letter prices rather than card prices. That is a price difference and not a problem, and she chose it knowingly. Because the card is over 4-1/4 inches high, the 0.009 inch minimum thickness applies, so she measured the stock: ten cards stacked came to just under a tenth of an inch, which clears it.
The one that would not have mailed. Her first idea was a square 5 by 5 inch card, which she liked. Ratio 1.0, outside the 1.3-to-2.5 range, nonmachinable, surcharged, and USPS's own example of the piece that jams the equipment. She kept the idea by putting a square card in a rectangular envelope, which is the standard way round it.
The date arithmetic. The hall needs numbers ten days before March 14, so March 4. Her RSVP date is March 1, which leaves three days to chase. The test card she mailed to herself took four days, so the real cards have to be in the mail at least a week before March 1, and she added a week for printing. That is the calculation that decides when the design has to be finished, and it is the one people do last.
What she set. Centered, one family, 11 point with 15-point line spacing, the occasion at the top, the date and the RSVP together as level two, and the address, parking and cost beneath. Thirty-eight characters on a full line, which is below the 45-to-90 range and deliberately so: six short lines are not running text.
8. Practice: measure, check, mail one Practice
Minimum: the dimensions checked and one card mailed to yourself. That is the result Start here asks for. Time: about an hour at a desk, plus the days the card takes to arrive. Materials: a ruler, the card stock you intend to use, Will this card mail?, and a trip to a counter.
- Write the facts a guest needs, from The words come first, on the Facts to check sheet.
- Measure the card you are thinking of rather than trusting its name. Height, length and thickness, with the length being the side parallel to the address.
- Put the three numbers into Will this card mail? and read the verdicts and the sections behind them.
- If it is going in an envelope, measure the envelope too, because the envelope is the mailpiece.
- Set the card with the date and the RSVP together at level two, centered if you are centering everything.
- Print one on the real stock, address it to yourself, and take it to a counter. Ask what it costs and write the answer down.
- Count backward from when you need the number: the person who needs it, then the RSVP date, then the days the mail takes, then the printing. That tells you when the design is due.
- When the test card arrives, look at it. Creases, scuffs, where the barcode landed.
The stranger read. Give the card to somebody not invited and ask what they would do next and what time they would arrive. It finds the missing end time faster than any checklist.
The two-envelope test. If you are undecided between two sizes, make one of each, mail both to yourself, and compare what the counter charged and what arrived.
The reply ledger. Add a column to the Facts to check sheet for the reply method and the name it goes to, and keep the replies in one place. One method, one list, one person.
9. Your piece Your piece
10. Check your work Check your work
Criteria
- Can a guest decide, from the card alone, whether they can come and what to do next?
- Is the end time on it?
- Does length divided by height land between 1.3 and 2.5, measured on the piece that actually gets mailed?
- Does the thickness clear the minimum that applies at that size?
- Has one arrived, mailed to you, at a price you know?
Worked example
Marguerite's card passes all five. The end time is on it, which her first draft did not have. The envelope's ratio is 1.38. The stock measured over 0.009 inch, which is the minimum that applies because the card is over 4-1/4 inches high. The test card arrived in four days and she knows what it cost. The thing the test card found that nothing else would have: the hall's address printed fine, and the barcode landed across the lower right of the envelope exactly where she had been planning to put a small decoration on the real ones.
Common mistakes
- Measuring the card when the envelope is the mailpiece.
- Height and length the wrong way round. Length is the side parallel to the address.
- A square card without a rectangular envelope. Ratio 1.0 is outside the range by construction.
- Printing on copier paper. It is under the 0.007 inch minimum.
- The date large at the top and the RSVP small at the bottom. They are one decision; set them together.
- Leaving the end time off.
- Counting back from the event instead of from when the number is needed.
- Printing seventy before mailing one.
What is still unresolved
This manual states no postage prices, because no USPS page it read carried one; the category is checkable and the figure comes from a counter or usps.com. It does not settle wording, because there is no authority to settle it with, and the conventions in your circle are a real constraint this manual knows nothing about. It does not resolve the conflicting card maximum inside DMM 201.1.2.1; it prints both figures, uses the smaller pair, and sends you to a counter if your card falls between them. And the type questions, size, line spacing and line length, are Type you can read.